Fully welded wide channel pate heat exchanger is specially created for the special requirements of customers. It has been successfully applied in alcohol, alumina and other industries, operating process medium such as fermentation mash, mash, aluminum hydroxide slurry.
Bearing capacity :2.1Mpa
Design temperature :350℃
Installed area :880m
Plate thickness :1.5 ~ 2.0mm
Plate material: 304/304l321/316l/duplex steel, etc
All spaced columns are 316L
U-shaped butt welding structure is adopted between plate pairs, which overcomes the shortage of v-shaped material accumulation and has stronger bearing capacity.
Material inlet and outlet plate surface wear-resistant treatment, abrasion resistance, improve the life.
Fixed Tubesheet Heat Exchanger Advantage
Fully welded wide channel pate heat exchanger has large-size plate, the maximum length is over 10000mm with a width of 1200mm. Adopting the technology of piecewise continuous forming of the whole plate, a plate is divided into several parts, which are pressed step by step on a ten thousands ton oil press,and finally the whole plate is formed. The length of each section and the structure size of the formed plate are exactly the same, this forming method is developed on the basis of traditional plate forming technology of plate heat exchanger, which ensures the quality of the plate pairs and welding.
It is applied in alcohol, alumina and other industries,operating process medium such as mash,fermentation mash,aluminum hydroxide surry.