(+86)-029-85200606       sales@guphe.com
  • 2021-01-22

    The shell-and-tube heat exchanger is a partitioned heat exchanger with the wall surface of the tube bundle enclosed in the shell as the heat transfer surface.This kind of heat exchanger has simple structure, low cost, wide circulation cross section, and easy to clean scale; but it has low heat trans

  • 2021-01-20

    Oil cooler is an oil cooling device commonly used in hydraulic systems and lubrication systems.The use of this equipment can achieve heat exchange between two fluid media with a certain temperature difference, thereby achieving the purpose of reducing the oil temperature and ensuring the normal oper

  • 2021-01-18

    The titanium heat exchanger is a series of corrugated metal plates, which form a thin rectangular channel from the new high-efficiency heat exchanger between various plates. The flow resistance and pumping work of the pipe are compared with the general case through half of the heat exchange. In the

  • 2021-01-15

    Condenser, a component of the refrigeration system, is a type of heat exchanger, which can convert gas or vapor into liquid, and transfer the heat in the tube to the air near the tube in a very fast manner. The working process of the condenser is an exothermic process, so the condenser temperature i

  • 2021-01-13

    The material is heated to 138~150℃ through the tube-in-tube heat exchanger under continuous flow and kept at this temperature for a certain period of time (2~4 seconds) to reach the commercial aseptic level, and then under aseptic condition Filled in aseptic packaging container in aseptic environmen

  • 2021-01-11

    The plate heat exchanger is a heat exchange device with a compact structure and easy assembly and disassembly, so it is more convenient to clean and repair.The plate heat exchanger is composed of a variety of components. Today, the editor will talk about several important parts of the plate heat exc

  • 2021-01-08

    Under natural conditions, it is also a kind of parts that are prone to aging. If the seal is thermally hardened, it will lose its original elasticity, which will cause the heat exchanger to not work properly. The main influence methods include the working method of the heat exchanger, the corrosiven

  • 2021-01-06

    1. The initial operation is slow, and the temperature should be fully preheated and gradually increased.2. Perform preheating of the pressure safety valve and adjustment after operation.3. The heat exchanger should start with the cold side valve and open the hot side valve when it is stable. When pa

  • 2021-01-04

    The heat exchanger is a device that transfers part of the heat of the hot fluid to the cold fluid, also known as the heat exchanger. Heat exchanger occupies an important position in chemical, petroleum, power, food and many other industrial productions. In chemical production, heat exchangers can be

  • 2021-01-01

    1. Sterilization room. The chamber itself is an essential part of any type of autoclave. It consists of an inner cavity and a jacket. In hospitals and laboratories, the "jacketed" autoclave chamber is also filled with steam, which means that by reducing the condensate in the inner chamber, it reduce

  • Total 19 pages  Go to Page
  • Go

Home

 Copyrights 2019 GUphe All rights reserved.     Sitemap