THT plate heat exchanger is a heat exchange equipment with high heat transfer efficiency, compact structure, flexible operation, easy maintenance and cleaning and other characteristics, mainly used for heating, cooling, evaporation, condensation, sterilization, heat recovery and other occasions, is one of the most efficient and energy-saving heat exchange equipment.
|Installed capacity||1 million SQM/year|
|Single plate maximum heat exchange area||4.0㎡|
|Single maximum installed area||3200㎡|
|Maximum water treatment capacity per unit||3800m /h|
|Maximum corner hole diameter||500mm|
|Maximum plate spacing||15mm|
|Minimum log mean temperature difference||1℃|
The sixth generation plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of two fluids between which heat transfer will take place.
The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts.
The plates are fitted wit a gasket which seals the channel and directs the fluids into alternate channles. The number of plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure.
The whole equipment has high pressure, not easy to leak in operation and high safety;Low resistance and high efficiency, energy saving and consumption reduction;Reduce maintenance, convenient maintenance, save human resources, reduce management costs.In normal use, the plate life can reach 20 years without corrosion, and the rubber gasket life can be more than 5 years.
1.High pressure capacity and resistance to alternating pressure impact
2.Advanced Technology & Low resistance & High Efficiency, Corrosion & Scale Prevention
It is mainly used for heating, cooling, evaporation, condensation, sterilization, heat recovery and other occasions, be widely used in Chemical: Caustic Soda, Fertilizer, Petrochemical, Oil Refinery, Oil & Fat, Pharmaceutical, Food: Milk, Beer, Soft Drink, Sauce, Wine, HVAC: Air-conditioning, Tap water heating.
Steel Mill: Blast Furnace, Continuous Casting, C.O.G,
Plating & Galvanizing, Metal: Plating, Quenching, Anodizing, Painting, Pulp & Paper: Black Liquor, White Liquor, Digester, Heat Recovery, Textile: Synthetic Fiber, Spinning, Dyeing, Central Cooling (Sea water, River water), Power Station,Co-generation, Marine and many others.