English
 |
Installed capacity: 1 million SQM/year
Single plate maximum heat exchange area: 4.0㎡
Single maximum installed area: 3200㎡
Maximum water treatment capacity per unit: 3800m /h
Pressure capacity: 4.2MPa
Maximum corner hole diameter: 500mm
| Quantity: | |
|---|---|
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fixed frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket, which seals the inter-plate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure.
Installed capacity: 1 million SQM/year
Single plate maximum heat exchange area: 4.0㎡
Single maximum installed area: 3200㎡
Maximum water treatment capacity per unit: 3800m /h
Pressure capacity: 4.2MPa
Maximum corner hole diameter: 500mm
Maximum plate spacing: 15mm
Minimum log mean temperature difference: 1℃
The whole equipment has high pressure, not easy to leak in operation and high safety;Low resistance and high efficiency, energy saving and consumption reduction;Reduce maintenance, convenient maintenance, save human resources, reduce management costs.In normal use, the plate life can reach 20 years without corrosion, and the rubber gasket life can be more than 5 years.
Evaporative Condenser Advantage
Safe and stable, high quality and efficient, green and energy-saving, customer service, convenient maintenance.
Product Description
It is mainly used for heating, cooling, evaporation, condensation, sterilization, heat recovery and other occasions, be widely used in Chemical: Caustic Soda, Fertilizer, Petrochemical, Oil Refinery, Oil & Fat, Pharmaceutical, Food: Milk, Beer, Soft Drink, Sauce, Wine, HVAC: Air-conditioning, Tap water heating
Steel Mill: Blast Furnace, Continuous Casting, C.O.G,
Plating & Galvanizing, Metal: Plating, Quenching, Anodizing, Painting, Pulp & Paper: Black Liquor, White Liquor, Digester, Heat Recovery, Textile: Synthetic Fiber, Spinning, Dyeing, Central Cooling (Sea water, River water), Power Station,Co-generation, Marine and many others.
